Satellite TV-Align how satellite TV]
Once dish is installed, in order to do this, you will need to arrange to catch the signal transmitted from the satellite The placement of dishes, in addition to receiving the signal, you need to adjust for higher quality reception Similarly, the needs of the recipients, can be adjusted to work in tandem with food Please follow the Step s to align satellite TV
Step 1
Set the dish
Low-noise block adjustment / Feedback (LNBF is) by moving the dish from left to right horn gently loosen the nut slightly
LNBF dish to use the coaxial connection to the receiver
Connect the receiver to your TV set
Switch on TV and receiver
Please refer to the manual to set initial receivers
Your location determines the level suitable for advanced, high on a plate to identify the indicators Adjust the elevation of the dish by moving up and down gently to loosen the nut plates and advanced Must stand in appropriate numbers to adjust the dish elevation for your location altitude indicator
The channel is broadcast in comparison with your TV channel guide, make sure that you receive the correct signals from the satellite dish If the dishes, or you receive a signal from another satellite could not get interested in watching the program does not understand the language
LNBF is then moved to the focus images